Which Mount Do I Have? Mini Skid Steer Mount Guide

Look at the picture, not the badge.

Mini skid steer mounts get called half a dozen different names, which is why the wrong attachment shows up on so many job sites. Find yours below. If you're not sure, send us a photo and we'll tell you — free, same day.

Step 1

Which of these looks like your machine's mount?

This is the plate the attachment hooks onto. Three shapes cover nearly every machine.

Mini Universal

"Toro Dingo style"
Most mini / stand-on machines

Bobcat MT

Bobcat's own mini mount
MT52 · MT55 · MT85 · MT100

Full-Size Universal

Every full-size skid steer
and compact track loader

Step 2

Found it? Here's what fits, and what we build.

Each mount has two halves — the plate on the machine, and the weldment on the attachment.

Mini Universal — "Toro Dingo style"

Most common

Mini universal mount on a Vermeer with no attachment

On a Vermeer, no attachment

Plate — face

Blank mini universal / Toro Dingo weldment

Blank weldment

Also called
mini universal · mini quick-attach · Toro mount · Dingo mount · CII · Ditch Witch mount · Vermeer mount

Machines
Toro Dingo TX · Ditch Witch SK · Vermeer S and CTX · Boxer · Ramrod · Thomas · Finn Eagle · Multi One · Kubota SCL · Wacker Neuson · most stand-on imports

We build: Bobcat MT → Toro Dingo adapter · Toro Dingo → full-size adapter · full-size → Toro Dingo adapter · blank weldment · mount plate (raw) · latch slot repair plate · trailer hitch receiver

Bobcat MT

Not the same as mini universal

On the machine, no attachment

Plate — back

Plate — angle

Also called
Bobcat mini mount · MT mount · Bobcat mini track loader plate

Machines
Bobcat MT52 · MT55 · MT85 · MT100

Read this bit
Bobcat's own MT plate is not the mini universal mount, so Toro/Dingo-style attachments need an adapter to go on one. But check before you order: Bobcat also sells these same models with a mini-universal plate from the factory, so an MT85 can be either. The model number doesn't tell you the mount — the picture does. Send us a photo and we'll confirm it free.

We build: Bobcat MT → Toro Dingo adapter · Bobcat MT → full-size adapter · mount plate (raw) · triple hitch attachment · trailer hitch receiver

Full-Size Universal

Every big machine

On the machine, no attachment

Plate — back

Blank weldment

Also called
universal quick attach · universal skid steer mount · quick-tach · standard universal

Machines
Effectively every full-size skid steer and compact track loader — Bobcat S and T series · Cat · John Deere · Case · New Holland · Kubota SVL · ASV PT100 and up

We build: mount plates in 1/4" and 3/8" raw steel · blank quick-tach weldment · trailer hitch receiver · heavy-duty hitch · every mini → full-size adapter above

ASV / Terex compact

Brand-specific

The machine

Blank plate

Machines
ASV RT25 · RT40 · RT65 · RT75 · Terex PT30 · R070T

Note
The bigger ASVs (PT100 and up) already run the full-size universal mount, so they need no conversion. Check which you have before ordering.

We build: ASV/Terex → Toro Dingo adapter · ASV/Terex → full-size adapter · blank mount plate (raw) · trailer hitch receiver mount

Gehl

Brand-specific

Mount plate

Mounting "ears"

Machines
Gehl 4525 · 4625 · 4635 · 4840 · 5620 · 5625 · 5635 · 5640 · 6620 · 6625 · 6635 · 6640

We build: Gehl → full-size skid steer adapter · Gehl mount plate (raw) · Gehl mounting ears (4-piece set)

What we don't build — and what won't fit

We'd rather tell you now than sell you the wrong part.

Kanga and Prodigy — we don't build adapters for these. Prodigy doesn't use the mini universal mount. Kanga is model-dependent: older machines are pin-on, some newer ones have a universal option, and suppliers disagree about which is which — so send a photo rather than going by the badge.
Excavator quick couplers — apart from our Kubota KX mounting ears, we don't build excavator coupler conversions.
Imported stand-on loaders — most are cut close to the mini universal pattern, but they come out of a handful of factories under many different badges and tolerances vary between batches. We've seen the same brand come both ways, so we won't promise a fit from the name on the machine. Send a photo and we'll tell you straight.
Oversized attachments on small machines — a full-size trencher will bolt to a mini through an adapter and still be a bad idea. We'll say so if you ask.
Plate drawings and dimensions — we don't publish those. The pictures above are enough to work out what you need, and we'll confirm your fit for free.

Not sure? Send a photo. That's the whole process.

Text or email a picture of the coupler on your machine — straight on, close enough to see the levers — and we'll tell you which mount you have and what fits it, same day, no obligation. We build to order in Edelstein, Illinois. If you need something that isn't on this page, ask.

And if you send us a clear shot of your bare coupler, we'd like to put it on this page so the next person can recognise theirs. We'll ask first.

zach@smithcustomz.com · text 1-815-200-9363

Everything above is made to order in our own shop from American steel. Mount names and machine models are listed to help identify fitment. All brand names are the property of their respective owners and are used for compatibility reference only. SmithCustomz is not affiliated with Bobcat, Toro, Ditch Witch, Vermeer, ASV, Terex, Gehl or Kubota.

Know your mount already? Use the adapter finder to see every part we build for it.